All topics

Work zones and railway crossings

In a construction zone, obey the posted speed and every sign, device and traffic-control person directing traffic. Stay in your lane, expect traffic ahead to stop suddenly, and look out for workers and their equipment. Speeding fines are doubled when workers are present.

Narrowed lanes, uneven surfaces and workers close to traffic make a construction zone far less forgiving of a mistake.

Slow down, look both ways and listen before you cross railway tracks. When a train is approaching, stop no closer than 5 m to the nearest rail or gate. Never race a train to a crossing, and never start across unless there's room to clear the tracks completely on the other side.

A car can't out-brake a train, and a train can take up to 2 km to stop even in an emergency.

Wait until the signal lights stop flashing and, if there's a gate, until it has risen before you cross. Never drive around, under or through a gate that is down, coming down or going up.

A gate that's still moving, or lights still flashing, means the crossing isn't clear yet, even if you can't see a train.

If your vehicle stalls or gets trapped on a crossing, get everyone out and away from it at once, then move to a safe place and call the authorities.

A vehicle stopped on the tracks is in the path of a train that may not be able to stop in time.

Source: Official MTO Driver's Handbook, Stopping.

Check yourself with practice questions and mock tests. Try it free in your browser.