All topics

Pavement markings

A yellow line has traffic going the other way on its far side. A white line divides lanes where traffic goes the same way as you.

A driver glancing at the road needs to know instantly whether the traffic across a line is coming toward them or going their way.

If the line on the left side of your lane is solid, passing there is unsafe. If it is broken, you may pass once the way is clear and there is enough broken line ahead to finish the pass.

Passing means briefly driving in a lane that belongs to someone else, so the marking has to tell you clearly when that's safe.

A stop line is one white line across your lane that shows where to stop. Two parallel white lines across the road mark a crosswalk. With no stop line, stop at the crosswalk; with no crosswalk, at the sidewalk edge; with no sidewalk, at the edge of the intersection.

A stop sign or red light tells you to stop, but not exactly where. The pavement marking fills in that detail.

Some roads have a centre lane set aside as a two-way left-turn lane, shared by left-turning drivers from both directions. Signal, move into it shortly before your turn, and turn only when you're sure the way is clear. Never use it to pass.

Left-turning drivers from both directions need somewhere to wait without blocking the traffic going straight behind them.

Watch out: In some places a centre lane like this is used to pass slower traffic. In Ontario it's for left turns only.

Source: Official MTO Driver's Handbook, Pavement markings.

Check yourself with practice questions and mock tests. Try it free in your browser.